1. Do not preheat your clothes.
2. The heat transfer paper pulls the heat up button of the heat transfer machine between 350-375 Kelvin (177-190 ℃) and waits for it to heat up to the set point.
3. After the image printed on the heat transfer paper is completely dry, trim the entire image along the blank edge of the image (no edges can be seen after trimming).
4. Take any corner of the blue grid edge of the heat transfer paper and slightly stretch the paper on the corner, the paper will be pulled out and the paper will be easily peeled off.
5. First, peel off a small triangle from the heat transfer paper.
6. Then you should carefully peel off the heat transfer paper from the blue grid paper.
7. Put the side with the image on the place where the clothes need to be transferred, and ensure that the image is flat and smooth on the clothes before transferring. Put another piece of silicone paper on it. Make sure the whole image is completely covered by the silicone paper. (Note: If you want to compare the glossy image, peel off the blue grid paper on the image with the smooth and bright side facing down to cover the image, instead of using the silicone paper provided).
8. Heat for 15-30 seconds. After the transfer paper feels completely cool, it can be peeled from any corner to other directions.
